Restore the factory image system

1. Format the SSD

Before restoring the factory image, you need to format the SSD into exFAT format.

1.1. Download DiskGenius

Download URL: https://www.diskgenius.cn/

image-20250110201003552

Unzip the downloaded compressed file to open DiskGenius.exe and use:

image-20250110201121200

1.1. Use DiskGenius

1.1.1, Delete partition

Deleting a partition will clear the disk data. Please confirm that the drive letter is the disk that needs to be formatted before confirming the operation: you can judge based on the disk size and the newly added drive letter of the connected disk

image-20250110201331658

image-20250110201403408

image-20250110201419269

image-20250110201432707

1.1.2. Create a new partition

Partition the SSD into exFAT format.

Select the drive letter corresponding to the SSD, and then click Quick Partition:

image-20250110201722505

Partition options: You can check as shown below

image-20250110201713954

image-20250110201833715

2. Restore the factory image

You need to download and decompress the factory image system in the data to your local computer in advance.

2.1. Install Win32DiskImager

Download URL: https://sourceforge.net/projects/win32diskimager/

image-20250110222239328

Open the win32diskimager-1.0.0-install.exe installation package as an administrator and accept the agreement:

image-20250110222209318

Installation location: The default location is recommended

image-2025011022214163 9

Installation options:

image-20250110222109847

image-20250110222041855

Start installation:

image-20250110222017810

Complete installation:

image-20250110221950093

2.2. Use Win32DiskImager

①: Select the factory image file (*.img) in the data

②: Select the drive letter corresponding to the solid-state drive

③: Write the factory image to the solid-state drive

image-20250110202003280

Confirm writing to the system:

image-20250110202018758

Wait for the system to be written successfully:

image-20250110202439181

image-20250110203047627

After the system is written, you can close the program and install the SSD to the Jetson Orin motherboard!

3. Description

The Jetson motherboard can start the system normally and it depends on the system Jetpack version. Generally, only the same version can start the system!