Restore initial image system

Restore initial image system1. Format the SSD1.1. Download DiskGenius1.1. Use DiskGenius1.1.1, Delete partition1.1.2. Create a new partition2. Restore the factory image2.1. Install Win32DiskImager2.2. Use Win32DiskImager3. Description

1. Format the SSD

Before restoring the factory image, you need to format the SSD into exFAT format.

1.1. Download DiskGenius

Download URL: https://www.diskgenius.com/

image-20250110201003552

Double-click the exe file you just downloaded to install DiskGenius. Follow the prompts to install the software on the Windows computer. After opening the software, it will be as shown below.

image-20250123103324948

1.1. Use DiskGenius

1.1.1, Delete partition

Deleting a partition will clear the disk data. Please confirm whether the drive letter is the disk that needs to be formatted before confirming the operation: you can judge based on the disk size and the newly added drive letter of the connected disk

image-20250123103430264

image-20250123103526303

image-20250123103555176

image-20250123103612549

1.1.2. Create a new partition

Partition the SSD into NTFS format.

Select the drive letter corresponding to the SSD, and then click New Partition:

image-20250123103732426

image-20250123103803273

image-20250123103855896

image-202501231039252 21

image-20250123103937125

image-20250123103950870

image-20250123104017947

2. Restore the factory image

You need to download and decompress the factory image system in the data to the local computer in advance.

2.1. Install Win32DiskImager

Download URL: https://sourceforge.net/projects/win32diskimager/

image-20250110222239328

Open the win32diskimager-1.0.0-install.exe installation package as an administrator and accept the agreement:

image-20250110222209318

Installation location: The default location is recommended

image-2025011022214163 9

Installation options:

image-20250110222109847

image-20250110222041855

Start installation:

image-20250110222017810

Complete installation:

image-20250110221950093

2.2. Use Win32DiskImager

①: Select the factory image file (*.img) in the data

②: Select the drive letter corresponding to the solid-state drive

③: Write the factory image to the solid-state drive

image-20250123105549673

Confirm writing to the system:

image-20250123105608261

Wait for the system to be written successfully:

image-20250123105647187

image-20250123111430147

After the system is written, you can close the program and install the SSD to the Jetson Orin motherboard!

3. Description

The Jetson motherboard can start the system normally and it depends on the system Jetpack version. Generally, only the same version can start the system!