Welcome to CUBE Pi Case repository
当製品の日本語版マニュアル資料は、こちらからご取得ください。
Installation steps
Raspberry Pi 5 PCIe to M.2 expansion board installation steps
Installation steps
(Here mainly shows the installation steps of Raspberry Pi and M.2), and the chassis combined with the specific installation to see the installation video of the data
Before using the Raspberry Pi 5 PCIe to M.2 expansion board, you need a Raspberry Pi 5
- Turn off the power of the Raspberry Pi, unplug all the cables connected to the Raspberry Pi, and then start the installation
- If you want to use the Raspberry Pi cooling fan, install the cooling fan first, and then install PCIE. If you do not install the cooling fan, directly see 6. Install the M.2 solid-state drive to the expansion board.
- Install the active radiator
- Install the fan.
- Install the copper pillars
- Install the M.2 SSD to the expansion board
- Install the copper pillars to fix the expansion board
- The final installation effect diagram
- Install the expansion board cable
- Install the Raspberry Pi cable (the side with RPI5 facing up)
Note: Do not hot-swap the PCIE board and nvme solid state drive, as this may damage them.
