Welcome to RPi AI Camera repository
Preparation before use
Preparation before use
Preparation before useHardware environmentInstallation stepsSoftware environmentBurn the imageFormat the SD cardBurn the imageStart the system
Hardware environment
AI Camera
Raspberry Pi 5
SD card: 64G and above
Installation steps
The camera must be installed and removed when the power is off. Operating with power on will burn the camera!
Software environment
Directly use the system image in our data: the system image has been configured with the required cases for the AI camera, just run the command to observe the effect!
xxxxxxxxxxThe system image and software tools used in the tutorial can be obtained from the corresponding data folder of the product
Burn the image
Unzip the system image we provide
Format the SD card (the SD card capacity needs to be 64G or above)
Burn the system image
Format the SD card
Format the SD card using SD Card Formatter: Close the software after formatting is complete
Burn the image
Use Win32 Disk Imager to burn the Raspberry Pi system image: Close the software after burning is completed
Option explanation
①: Select the decompressed system image file
②: Select the disk corresponding to the SD card
③: Write the image
Eject the disk after writing is complete!
Start the system
Install the SD card into the SD card slot of the Raspberry Pi 5 and start the Raspberry Pi 5 using the Raspberry Pi power supply.