Welcome to RPi AI Camera repository
Environment construction
Environment Setup
Environment SetupReferencesUpdate system environmentInstall IMX500 firmwareRestart the systemCamera preview
Using our system image does not require installing or updating any software, just run the camera startup command!
References
Official website of Raspberry Pi AI Camera
https://www.raspberrypi.com/documentation/accessories/ai-camera.html
Update system environment
Make sure Raspberry Pi runs the latest software:
xxxxxxxxxxsudo apt update && sudo apt full-upgrade
Install IMX500 firmware
Firmware is required to start the camera:
xxxxxxxxxxsudo apt install imx500-all
Restart the system
Restart the system, and the previous operations will take effect:
xxxxxxxxxxsudo reboot
Camera preview
Check the camera device number
xxxxxxxxxxls /dev/video*
Check the camera screen
Preview the screen for 5 seconds:
xxxxxxxxxxrpicam-hello
Continue to preview the screen:
xxxxxxxxxxrpicam-hello --timeout 0
Press Ctrl+c in the terminal or click the x in the upper right corner of the screen to close the program.