Welcome to Tiny:bit Robot Car repository
当製品の日本語版マニュアル資料は、こちらからご取得ください。
4.2 Play Merry Christma with lights
1.Preparation
1-1.The position of the buzzer on the robot car
1-2..Learn some basic music knowledge
Programming method:
Mode 1 online programming: First, we need to connect the micro:bit to the computer by USB cable. The computer will pop up a USB flash drive and click on the URL in the USB flash drive: http://microbit.org/ to enter the programming interface. Add the Yahboom package: https://github.com/YahboomTechnology/Tiny-bitLib to program.
Mode 2 offline programming: We need to open the offline programming software. After the installation is complete, enter the programming interface, click【New Project】, add Yahboom package: https://github.com/YahboomTechnology/Tiny-bitLib, you can program.
In the picture shown below, the black cylinder circled by the red wire frame is the buzzer on the Tiny-bit.
2.Learning goal
2-1.Learn how to use buzzer graphically program building blocks
2-2.In this lesson, we will play music 《Merry Christmas》with colorful lights.
3.Search for block
The following is the location of the building blocks required for this programming.
4.Combine block
About the summary program. Please refer to the microbit-Merry-Christmas.hex file.
5.Experimental phenomena
After the program is downloaded, robot car will play 《Merry Christmas》with lights.