yahboom
HomeLearn
Solution
Blog
Online Store
About Us
EN/中文
10-axis IMU Navigation Module📖
1.Preparation
  • 1.1 Introduction to the IMU module
  • 1.2 Install the IMU module
  • 1.3 Precautions for use
2.PC Software tutorial
  • 2.1 Install serial driver
  • 2.2 Connect to the PC software
  • 2.3 Configuration parameters
  • 2.4 Calibrate the IMU module
  • 2.5 Graphically display data
  • 2.6 Connected to the GPS module
3.Basic application
  • 3.1 Raspberry Pi-USB application
  • 3.2 JetsonNano-USB application
4.ROS application
  • ROS1 application case tutorial
  • ROS2 application case tutorial
5.Communication protocol
  • Communication protocol
6.STM32 tutorial
  • 1. serial port application routine
  • 2. IIC application routine
7.RDK X3 tutorial
  • RDK X3 tutorial
8.MSPM0 tutorial
  • MSPM0G3507 serial port application
  • MSPM0G3519 serial port applicationnew
Download
  • Code
  • 3D_Model_File
  • Annex
Download ZIP

Welcome to 10-axis IMU Navigation Module repository

2.4 Calibrate the IMU module

Configuration parameters
Graphically display data

COMPANY

  • About us
  • Team Style
  • Blog

LEARNING & EXPLORATION

  • Tutorials
  • Edge AI hardware
  • Educational robots
  • Embedded intelligent hardware

WHERE TO BUY

  • Yahboom Online Store
  • Amazon
  • Alibaba
  • AliExpress
  • Mercado

TECHNOLOGY SUPPORT

  • Email: support@yahboom.com

BE A DISTRIBUTOR

  • Email: sales@yahboom.com
QR Code

Copyright © 2017-2026 Yahboom. All Rights Reserved.

EN/中文