Welcome to DOFBOT-JetsonNANO repository

Essential Pre-Operation Reading

In the factory-installed system image, JupyterLab comes pre-installed with a password already configured. Similarly, JupyterLab is also installed and password-protected within the Docker container.

The port for the JupyterLab instance running directly on the mainboard is 8888, while the port for the JupyterLab instance within the Docker container is 9999. The mainboard's JupyterLab instance starts automatically upon system boot-up; however, the JupyterLab instance inside the Docker container requires you to manually access the container environment and execute a specific command to launch it.

Ensure that your PC is connected to the same network as the mainboard. Open a web browser, enter the mainboard's IP address followed by :8888, and press Enter to access the JupyterLab instance running on the mainboard. Upon your first login, you will be prompted to enter a password; the password is yahboom.

Once you have accessed the container's terminal environment, enter the following commands within the terminal:

cd
jupyter-lab --allow-root

Ensure that your PC is connected to the same network as the mainboard. Open a web browser, enter the mainboard's IP address followed by :9999, and press Enter to access the JupyterLab instance running inside the container. Upon your first login, you will be prompted to enter a password; the password is yahboom.