Welcome to L-Type Motor repository
0. Notes (must read)
Safety tips for using STM32 development board
① The screws fixing the development board need to be tightened to prevent the screws from falling or the copper pillars from shifting and causing a short circuit.
② During use, the development board needs to be placed on a non-conductive plane to avoid contact with metal and causing a short circuit.
⑤ Be careful to use batteries without protection boards such as aircraft model batteries to power the device to prevent short circuits from burning the circuit board.
⑥ When using encoder motors/servos that are not from Yabo official, the wiring should be strictly in accordance with the wiring sequence of the development board, otherwise the expansion board will burn out.
⑦ For all interfaces of the expansion board, the wiring sequence should be carefully checked when wiring, and short circuits, reverse connection or connection to overvoltage equipment is prohibited.
⑧ The power interface (T-type interface) is prohibited from inputting a voltage exceeding 8.4V, otherwise the motor will burn out.
Note: Warranty service cannot be provided for product damage caused by failure to comply with the above safety guidelines.