Welcome to RDK S600 Developer Kit repository
1.8 System Boot Modes
System Boot Modes
1. BOOT DIP Switch Location
The BOOT DIP switch is located on the back of the S600 development board.

2. BOOT DIP Switch Selection
For SW8 DIP switch, set to 1 for ON, set to 0 for OFF.
| Reference | D12 | D13 | Function |
|---|---|---|---|
| SW8 | OFF | ON | System image boots from NVMe |
| ON | OFF | - | |
| ON | ON | System image boots from UFS | |
| OFF | OFF | System image boots from UFS |
Note:
- The V0P2 version does not support NVMe boot for the time being.