Welcome to Raspberry Pi 4B repository
2.1 Log into Raspberry Pi system
How to log into Raspberry Pi system
! Note:
The IP address here is an example, the user needs to fill in the IP address of your Raspberry Pi.
Method-1: PuTTY remote login
You can remote login into the system of Raspberry Pi by PuTTY software.
(Note : This software in the Tools folder)
Method-2: VNC remote login
VNC is also a relatively common method of logging into the Raspberry Pi system.
Official original system image of the Raspberry pi with VNC Server, but is not enabled by default. So we need to open this service by ourself.
The following steps will teach you how to open VNC service.
1)You need to open the command line terminal in the Raspberry Pi system and input:sudo raspi-config ,as shown in the figure below.
2)You should choose :5 Interfacing Options,as shown in the figure below.
3)You should choose :P3 VNC,as shown in the figure below.
4)You should choose :Yes ,as shown in the figure below.
5)The interface shown in the figure below indicates that the VNC service is opened successfully.
After the above steps, we have opened the VNC service successfully.
When the Raspberry Pi is turned on every time, the VNC Server will start itself. This ensures that we can remotely log into the Raspberry Pi at any time.
The following steps will teach you how to log into the Raspberry Pi system by VNC.
(Note : This software in the Tools folder)
1) You need to double-click this software to use it and input the IP address of your Raspberry Pi. As shown in the figure below.
2) You need to input Username and password.
4) When the connection is successful, you will see the remote desktop of the raspberry pi. As shown in the figure below.
