yahboom
HomeLearn
Solution
Blog
Online Store
About Us
EN/中文
myCobot 320 Arm📖
1.Product Feature
  • 1.Functional Parameters
  • 2.Controller Parameters
  • 3.Structural Parameters
  • 4.Electronic Parameters
  • 5.Coordinate System
  • 6.Introduction of Adaptive Gripper
  • 7.Introduction of force-controlled gripper
2.Common Problem
  • 1.how to ask
  • 2.driver
  • 3.software
  • 4.hardware
3.First Install and Use
  • 1.Product Standard List
  • 2.Product Unboxing Guide
  • 3.Power-on Test Guide
4.Basic Application
1. miniRoboFLow
  • 1. miniRoboFLow
  • 2. Drag & Play
  • 3. Joint Calibration
  • 4. Computer Connect
  • 5. Robot Information
2.1 myblockly
  • 1. What is myBlockly
  • 2. Preparations before using myBlockly
  • 3. myBlockly download and install
  • 4. myBlockly interface display and use of basic functions
  • 5. Control RGB light panel
  • 6. Control the robotic arm to return to the origin
  • 7. Control single joint movement
  • 8. Control multiple joints
  • 9. Use of adaptive grippers
  • 10. Use of force-controlled grippers
  • 11. Q&A
  • 12. API
3. Firmware Description
  • 1.Firmware Description
  • 2.Burn Firmware
2.2 myStudio
  • 1. myStudio
  • 2. myStudio environment setup
  • 3. Install driver
  • 4. Burn and update firmware
5.Mobile APP control
  • Mobile APP control
6.SDK Development
1.Development Environment Construction
  • 1.Development Environment Construction
2.Python
  • 1.What is Python
  • 2.Environment Building
  • 3.Python API usage instaructions
  • 4.TCP IP
  • 5.Drag to teach
  • 6.Use Cases
  • 7.Use of adaptive grippers
  • 8.Use of force-controlled grippers
3.ROS1
  • 1.ROS
  • 2.Environment Building
  • 3.ROS basics
  • 4.Rviz use
  • 5.Basic function case
  • 6.Use of adaptive grippers
  • 7.Use of force-controlled grippers
4.ROS2
  • 1.ROS2 introduction
  • 2.Environment Building
  • 3.ROS2 basics
  • 4.Rviz2 use
  • 5.Basic function case
5.C Sharp(C#)
  • 1.C#
  • 2.Environmental construction
  • 3.Mechanical control
  • 4.myCobot API
  • 5.Use Cases
  • 6.Use of adaptive grippers
6.c plus plus (C++)
  • 1.C++
  • 2.CPlus Download
  • 3.build
  • 4.API
  • 5.example
7.Arduino
  • 1.Arduino
  • 2.Arduino Download
  • 3.API
  • 4.example
  • 5.Use of adaptive grippers
8.Serial communication
  • 1.Serial communication
  • 2.Use of force-controlled grippers
7.Documents Download
  • 1.Product Brochure
  • 2.Software and Source Code
  • 3.System lnformation
Download
  • 3D_Model_File
  • Android Mobile APP
  • Manual
Download ZIP

Welcome to myCobot 320 Arm repository

3. Install driver

Install driver

Users can click the button below to download the corresponding CP210X or CP34X driver compressed package according to the operating system they are using. After decompressing the compressed package, select the installation package corresponding to the number of bits of the operating system to install.

There are currently two driver chip versions, CP210X (applicable to CP2104 version) and CP34X (applicable to CH9102 version) driver compressed package. If you are not sure which USB chip your device uses, you can install both drivers at the same time. (CH9102_VCP_SER_MacOS During the installation process, an error may appear, but the installation has actually been completed, so just ignore it.)

For Mac OS, before installing make sure system "Preferences->Security & Privacy->General" and allow access from App Store and Recognized Developers.

  • Download the M5Stack-basic serial port driver at the bottom

    • CP210X

      • Windows10

      • MacOS

      • Linux

      • CP34X

        • Windows10

        • MacOS

  • Download the Atom serial port driver at the end

    • Windows10

P210X_install

1.3 How to distinguish CP210X and CP34X chips

  • As shown in the figure below, open Device Manager and view Ports (COM and LPT)

frimware_check

  • If Port (COM and LPT) displays USB-Enhanced-SERIAL CH9102, it is CP34X chip

CP34X

  • If Port (COM and LPT) shows Silicon Labs CP210x USB to UART Bridge, it is CP210X chip

CP210C

myStudio environment setup
Burn and update firmware

COMPANY

  • About us
  • Team Style
  • Blog

LEARNING & EXPLORATION

  • Tutorials
  • Edge AI hardware
  • Educational robots
  • Embedded intelligent hardware

WHERE TO BUY

  • Yahboom Online Store
  • Amazon
  • Alibaba
  • AliExpress
  • Mercado

TECHNOLOGY SUPPORT

  • Email: support@yahboom.com

BE A DISTRIBUTOR

  • Email: sales@yahboom.com
QR Code

Copyright © 2017-2026 Yahboom. All Rights Reserved.

EN/中文