Introduction to RDK X5 board

Notes on using a 7-inch screen with RDK

Because the resolution of the 7-inch screen is 1024*600, which is not a common resolution, you need to modify the configuration file before using it. If you do not modify it, the display will be incomplete.

Remotely log in or connect a keyboard and mouse to the RDK motherboard, open the terminal

Enter the following command：

sudo nano /etc/x11/xorg.conf.d/1-resolution.conf

Modify Modes to 1024x600, as shown below

After modification, press Ctrl+S on the keyboard to save, and then press Ctrl+X to exit the editor

Then enter the following command to reboot

xxxxxxxxxx
sudo reboot