Welcome to ROSMASTER R2 repository

3、Robot control

1、Program function description

Open the chassis, run the handle/keyboard control program, you can control the trolley movement through the handle or keyboard, and the handle also controls the buzzer, controls the light strip and other functions.

2、Program code reference path

For Raspberry Pi PI5 master control, you need to enter the docker container first, but for Orin motherboard, you do not need to enter.

the location of the source code of the controller control function is located, taking the X3 model as an example

~/yahboomcar_ros2_ws/yahboomcar_ws/src/yahboomcar_ctrl/yahboomcar_ctrl/yahboom_joy_R2.py

the location of the source code of the keyboard control function is located at,

xxxxxxxxxx
~/yahboomcar_ros2_ws/yahboomcar_ws/src/yahboomcar_ctrl/yahboomcar_ctrl/yahboom_keyboard.py

3、The program starts

xxxxxxxxxx
#The underlying driver
ros2 run yahboomcar_bringup Ackman_driver_R2
#Handle control
ros2 run yahboomcar_ctrl yahboom_joy_R2
ros2 run joy joy_node
#Keyboard control
ros2 run yahboomcar_ctrl yahboom_keyboard

It should be noted here that the controller and the keyboard cannot run at the same time, because after the keyboard control is started, when the keyboard is not pressed, the default is to send a message with 0 data of speed.

3.1、Controller control

After turning on, press the "START" button, hear the buzzer sound, and you can start the remote control. The remote control will enter sleep mode after being turned on for a period of time, and you need to press the "START" button to end sleep. If you want to control the trolley running, you also need to press the R2 key and release the motion control lock before you can use the joystick to control the trolley movement.

Remote control effect description,

3.2、keyboard control

Key description,

• Direction control

• Speed control

3.3、node communication

Handle control trolley node communication diagram,

Keyboard control trolley node communication diagram,

4、core code parsing

4.1、Controller control code

Taking the X3 model as an example, we said in the previous lesson that the chassis control program is the Mcnamu_driver_X3.py, defining three subscribers: speed (/cmd_vel), light strip effect (/RGBLight), and buzzer (/buzzer), so we can control speed, light strip and buzzer as long as we publish this type of topic data yahboom_joy_X3.py the controller control code program.

xxxxxxxxxx
#create pub
self.pub_goal = self.create_publisher(GoalID,"move_base/cancel",10)
self.pub_cmdVel = self.create_publisher(Twist,'cmd_vel',  10)
self.pub_Buzzer = self.create_publisher(Bool,"Buzzer",  1)
self.pub_RGBLight = self.create_publisher(Int32,"RGBLight" , 10)
self.pub_JoyState = self.create_publisher(Bool,"JoyState",  10)

In addition, we need to subscribe to the "joy" topic data, which tells us that the keys (joysticks and keys) have changed, that is,

xxxxxxxxxx
#create sub
self.sub_Joy = self.create_subscription(Joy,'joy', self.buttonCallback,10)

The main look is the callback function of this joy topic, which parses the received value, then assigns the value to the publisher's variable, and finally publishes it.

xxxxxxxxxx
def buttonCallback(self,joy_data):
    if not isinstance(joy_data, Joy): return
    if self.user_name == "root": self.user_jetson(joy_data)
    else: self.user_pc(joy_data)

The function jumps here are self.user_jetson, and the parameter variable passed in is the topic received,

xxxxxxxxxx
def user_jetson(self, joy_data):

Take the control buzzer as an example for analysis,

xxxxxxxxxx
if joy_data.buttons[11] == 1:
    Buzzer_ctrl = Bool()
    self.Buzzer_active=not self.Buzzer_active
    Buzzer_ctrl.data =self.Buzzer_active
    for i in range(3): self.pub_Buzzer.publish(Buzzer_ctrl)
<
 Robot information release
Robot state estimation