Welcome to Muto RS Robot repository
10)Static IP and hotspot mode
10.Driver library and communication
10.Driver library and communication1、Install serial port driver library2.Install robot driver library
1、Install serial port driver library
Since the robot and the underlying expansion board use serial port communication, the serial port driver library needs to be installed before it can be used. The Yahboom Muto system has already installed the serial port driver, so you can ignore the following steps.
The Ubuntu system has multiple serial libraries. Installation errors may cause the serial port to fail to communicate properly. Please follow the steps below to install the serial port driver library.
Open the terminal and enter the following command to install the serial port driver
sudo pip3 install pyserial
Check the version number of the serial port driver library
xxxxxxxxxxpip3 list | grep pyserial

2.Install robot driver library
The Yahboom Muto mirror system has already installed the latest robot driver library, so there is no need to reinstall it. You only need to install the robot driver library if you are not using a Yahboom image or if the driver library has updated content.
The following installation process takes Jetson Nano’s installation of the MutoLib driver library as an example:
Transfer the driver library file to the system, taking transferring to the desktop as an example, and decompress it to obt