Welcome to Jetson Orin NANO Developer Kit repository
09.Jetpack old system upgraded to Yahboom SUPER factory system
Upgrading the Old Jetpack System to the Yahboom SUPER Factory System
Upgrading the Old Jetpack System to the Yahboom SUPER Factory System1. Description2. Upgrade Method2.1. Writing the SUPER Bootloader2.2. Restoring the Factory Image System2.3. SSD Expansion
1. Description
This tutorial is mainly provided to the following customers
Users who purchased the Jetson Orin official kit / Jetson Orin SUB kit before October 2026
Note:
Users who purchased Jetson Orin after October 2026 should operate according to the method below

2. Upgrade Method
2.1. Writing the SUPER Bootloader
Refer to the tutorial 【Chapter 2 Mainboard Basics: 07. Writing the SUPER Bootloader (Must Read)】 for the operation: completing this tutorial allows the mainboard to boot the Jetpack 7.2.1 system.
2.2. Restoring the Factory Image System
Refer to the tutorial 【Chapter 2 Mainboard Basics: 05. Restoring the Factory Image System】 for the operation: completing this tutorial writes the SUPER (Jetpack 7.2.1) system to the SSD.
Note: An SSD enclosure needs to be prepared in advance
2.3. SSD Expansion
Refer to the tutorial 【Chapter 2 Mainboard Basics: SSD Expansion】 for the operation: completing this tutorial allocates the unallocated space of the SSD.