Welcome to Jetson Orin NANO Developer Kit repository
03.GPIO reading
GPIO Reading Function
1. GPIO Pin Diagram
GPIO.BOARD pin 12 corresponds to GPIO.BCM pin 18:

2. Run the Program
cd ~/jetson-gpio/samples
xxxxxxxxxxexport JETSON_MODEL_NAME=JETSON_ORIN_NANO
xxxxxxxxxxpython3 simple_input.py
3. Program Effect
Use a jumper wire to connect GPIO.BOARD pin 12 to the GND pin or the 3.3V pin on the mainboard to test the reading of high and low levels:
Note: Do not connect the pins incorrectly or cause a pin short circuit; a mistake may damage the mainboard hardware!
