Welcome to Jetson Orin NANO Developer Kit repository
5. AI Weather Station
OpenClaw AI Weather Station Tutorial
Before starting, please complete 01-Hardware Configuration, 02-openclaw API-KEY Configuration, 03-openclaw Model Switching, 04-AI Voice Interaction Configuration, 05-Three Dialogue Solution Configuration Tests under the
Prerequisitesdirectory. If you are currently only using TUI / whatsapp, you can skip04for now. This article assumes the basic environment has been prepared and only expands on the AI weather station project itself.
1. Tutorial Objectives
This article demonstrates OpenClaw's capabilities in desktop weather station scenarios through temperature/humidity collection, information display, and AI explanation. After completing this tutorial, readers can:
Understand how to combine DHT, OLED, and RGB to create a local AI weather station
Communicate with OpenClaw through three methods: whatsapp, TUI, and voice code
Complete four project scenarios: environment collection, AI broadcast, weather card, status alert
2. Hardware Preparation
OpenClaw mainboard
DHT temperature and humidity sensor
OLED display
RGB light strip / RGB light bead module
[Optional] AI voice module + speakerWiring diagram

3. Software Preparation
Code entry points that will be used in the tutorial
Temperature and humidity reading command:
/home/jetson/hardware_hal_demo/dhtOLED control command:
/home/jetson/hardware_hal_demo/oledRGB control command:
/home/jetson/hardware_hal_demo/rgbVoice entry:
/home/jetson/voice_to_openclaw/src/main.pyTerminal text entry:
/home/jetson/voice_to_openclaw/src/text_main.py
The current set of tutorials focuses on "local environmental weather station", which is based on DHT indoor temperature and humidity data for display and explanation;
4. Test Project Basic Capabilities
Before starting this project, please complete one openclaw tui basic dialogue self-check; if you haven't done it yet, see 05-Three Dialogue Solution Configuration Tests. After passing, enter AI weather station specific testing.
It is recommended to first enter OpenClaw TUI:
openclaw tui
Then test the following types of commands:
Read current temperature and humidity
Display weather card on OLED
If environment is normal, light green
Give me a brief environment broadcast
5. Three Solutions for Communicating with OpenClaw
| Solution | Suitable Scenarios | Advantages | Recommended Positioning |
|---|---|---|---|
| Remote environment viewing, classroom demonstrations | Suitable for remote inquiry "how is the environment now" | Demonstrate "remote weather station assistant" | |
| TUI | Local debugging, threshold verification | Easiest to troubleshoot sensor and display logic | First run through collection chain |
| Voice code | Voice broadcast, desktop assistant | Closer to daily usage experience | As final demonstration solution |
If optional AI voice module + speaker are selected, whatsapp dialogue, tui, whatsapp dialogue need to broadcast OpenClaw's reply content. You can run the following program in terminal. AI voice module dialogue does not need to run repeatedly
Modify whether to enable broadcast parameter
xxxxxxxxxx/home/jetson/voice_to_openclaw/.env
xxxxxxxxxxENABLE_TTS=true #This parameter controls whether to broadcast. After modification and saving, run the following program in terminalTerminal input
xxxxxxxxxxcd ~/voice_to_openclawsource .venv/bin/activatepython -m src.openclaw_session_tts
5.1 whatsapp Solution
For whatsapp connection and robot creation steps, please directly refer to 05-Three Dialogue Solution Configuration Tests. After creation, you can remotely view environmental status in whatsapp, for example:
How is the indoor environment now? If it's too hot, remind me

5.2 TUI Solution
If you have completed the TUI self-check in Chapter 0, directly enter terminal text dialogue:
xxxxxxxxxxopenclaw tuiThen enter project-related commands, for example:
Get Beijing's current weather and display it on OLED

5.3 Voice Code Solution
xxxxxxxxxxRequires optional AI voice interaction module + speaker
For voice module installation, environment configuration, and basic wake-up process, please directly refer to 04-AI Voice Interaction Configuration. After waking up, you can directly say control content, for example:
AI weather station

6. Project Implementation
Note: The following are all dialogue demonstrations using openclaw tui method. You can also choose whatsapp or voice method to complete.
6.1 Scenario One: Environment Collection
Experimental Objective
Read the local environment's temperature and humidity, completing the most basic data sampling for the weather station.
Effect Description
OpenClaw will call DHT to obtain current environmental data, and return results to the user, forming a real-time "weather reading" of the indoor environment.
Example Instructions
Read current environmental temperature and humidity
What is the current indoor temperature and humidity
Help me check the current weather data
6.2 Scenario Two: AI Broadcast
Experimental Objective
Let OpenClaw not only report numbers, but also summarize environmental status like a weather broadcaster.
Effect Description
OpenClaw can summarize "26 degrees, 57% humidity" into more natural words, such as "environment is relatively comfortable", "somewhat stuffy", "air is slightly dry", etc.
Example Instructions
Give me a brief environment broadcast
Is the current environment comfortable
Make a weather summary based on current readings
6.3 Scenario Three: OLED Weather Card
Experimental Objective
Display the local temperature and humidity results as a more "weather card" style page.
Effect Description
Besides pure text results, OLED can also arrange location, status, temperature, and humidity into a concise card, making the entire project more like a displayable desktop device.
Example Instructions
Display an indoor weather card on OLED
Get current weather for XX location, and display on OLED
6.4 Scenario Four: RGB Status Alert
Experimental Objective
Use RGB colors to quickly express current environmental status.
Effect Description
For example, when environment is comfortable, light green; when too hot, light yellow; when abnormal, light red. This way, even without looking at text, you can quickly know the current environmental status.
Example Instructions
If environment is normal, light green
If temperature is high, light yellow
If abnormal, light red blinking