Welcome to Jetson Orin NANO Developer Kit repository
03.Installing Jetson environment
Installing the Jetson Environment
Installing the Jetson Environment1. Hardware Connection2. Software Connection3. Using SDK Manager3.1. Mainboard Selection3.2. STEP13.3. STEP23.4. STEP33.5. STEP44. Environment Verification
Some users may need to use the NVIDIA built-in system component environment. After the system is installed and the system desktop is successfully entered, the component environment can be installed according to the tutorial below!
Note: The SSD that comes with the product contains a factory image, and the factory image includes the NVIDIA official system and the mainboard environment; if you do not require a clean system, do not operate!
The whole process has network requirements, and some components may require a VPN. If the user cannot complete the component installation, use our factory image
1. Hardware Connection
The Jetson Orin mainboard needs to be connected to a DC power adapter, a DP data cable, a network cable, and a Type C data cable: the Type C data cable connects to the computer or virtual machine
This illustration is based on the official version of Jetson Orin Nano. Users of other versions can refer to it (the hardware interfaces and functional layout are the same)
Note: Installing the Jetson environment does not require entering Recovery mode; the mainboard just needs to be powered on!!!

2. Software Connection
The tutorial uses VMware Workstation 17 Pro to write the system!
After starting the virtual machine, select in the menu bar: Virtual Machine → NVIDIA Linux for Tegra → Confirm the connection status with the virtual machine

3. Using SDK Manager
The Jetson Orin mainboard is in the normal system boot state; connect it to the computer or virtual machine with a Type-C data cable.
3.1. Mainboard Selection
After opening SDK Manager, select according to your own mainboard model: for the official kit, select Jetson Orin Nano [*GB developer kit version]
3.2. STEP1
Check the options below, and click CONTINUE after confirming that the selections are consistent:

3.3. STEP2
The system is already installed successfully, so only the required component environment needs to be checked: SDK Manager downloads all components automatically, and the next step can continue after the download is complete

Enter the virtual machine password: yahboom. If it is your own virtual machine, enter your own password

3.4. STEP3
Enter the username and password that were set for yourself when starting the system earlier: the whole process takes a relatively long time, please wait patiently

Wait for the system to download and install: if a network failure appears in the virtual machine during the process, it can be ignored. In actual tests it does not affect writing the component environment

The whole installation process takes a long time, please wait patiently. If the installation fails, reboot the mainboard system and restart SDK Manager to install:


3.5. STEP4

4. Environment Verification
Jtop Tool
Use the commands below to install Jtop:
xxxxxxxxxxsudo apt updatesudo apt install python3-pip -ysudo pip3 install -U jetson-stats --break-system-packagessudo jtop --install-service

Note: The system needs to be restarted after the installation is complete!
Best Performance Mode
Enable MAX power mode
xxxxxxxxxxsudo nvpmodel -m 2 # Jetson Orin Nano

Enable Jetson clocks: the CPU and GPU cores all run at maximum frequency
xxxxxxxxxxsudo jetson_clocks
Use the Jtop tool to view system information:
xxxxxxxxxxjtop

