Welcome to Jetson Orin NANO Developer Kit repository
05.Serial communication
Serial Communication
Serial Communication1. GPIO Pin Diagram2. Serial Port Test2.1. Install cutecom2.2. Use cutecom3. Experiment Effect
1. GPIO Pin Diagram
GPIO.BOARD pin 8 corresponds to GPIO.BCM 14, and GPIO.BOARD pin 10 corresponds to GPIO.BCM 15:

2. Serial Port Test
2.1. Install cutecom
sudo apt updatesudo apt install cutecom -y

2.2. Use cutecom
Start cutecom in the terminal:
xxxxxxxxxxsudo cutecom

3. Experiment Effect
Use a jumper cap or a DuPont wire to short GPIO.BOARD pin 8 and GPIO.BOARD pin 10.
Use cutecom to open the /dev/ttyTHS1 serial port: enter the data to be sent by the serial port in Input. The upper window displays the data sent by the /dev/ttyTHS1 serial port, and the lower window displays the data received by /dev/ttyTHS1:
Note: Do not connect the pins incorrectly or cause a pin short circuit; a mistake may damage the mainboard hardware!
